Frequently asked questions
There is no minimum. We manufacture to your drawings from a single piece. For co-development projects where our engineers join at the structural design stage, the practical starting point is 50 pieces.
Within 48 hours of receiving your drawings or samples. Send DXF, DWG, STEP or PDF along with your material and surface finishing requirements, and we will come back with pricing and any manufacturability questions.
First article prototypes take 7 days. Production orders run 7 to 15 days depending on batch size and complexity. Co-development projects that include structural design input typically run 25 to 40 days.
All six stages: laser cutting, CNC bending, precision welding, surface finishing, riveting and assembly, and inspection. Nothing is subcontracted between steps, so lead time stays predictable and tolerance stays stable.
Carbon steel, stainless steel and aluminium across cutting, bending and welding. Plate thickness runs from 0.5mm to 25mm on our 6000W fiber laser equipment.
Laser cutting to plus or minus 0.1mm and bending angles to plus or minus 0.5 degrees. Hole position to plus or minus 0.05mm. Critical dimensions are confirmed on the first article at 100 percent, then sampled to AQL 0.65 during production.
Yes. Every shipment includes an inspection report and material certificates. We use CMM, optical projectors and calipers across three sampling levels, and inspection records are kept for two years and available on request.
Powder coating, anodising and zinc plating. Film thickness of 60 to 120 micrometres, with colour difference held to Delta E of 1.5 or better. We run our own powder line plus a qualified subcontract route for finishing.
We operate under an ISO 9001 certified quality management system, covering both manufacturing processes and inspection procedures.
Yes. Our engineering team runs a DFM review on your drawings and flags manufacturability issues along with cost-down options, before any tooling is committed.
Send your drawings or samples through the contact page, or message us on WhatsApp at +86 159 9293 5461. Include material, batch size and your target date, and we will respond the same day.
